Step 1
1. Thoroughly clean panels with Rapid Tac/Rapid Tac II and kitchen paper towel. Do not use other cleaners or solvents, nor cloth towels or commercial paper towels.

Step 2

2. Spray panels again with Rapid Tac/Rapid Tac II. Peel backing off decal and place on wet panel. You may spray adhesive side of decal  

Step 3

3. Align decal. Use squeegee to remove fluid, using a good deal of pressure and working from the center out toward the edges in all directions.

Step 4

4. Wait 2-3 minutes. If decal has cover tape, saturate it with Rapid Tac/Rapid Tac II, then remove the tape. Wipe with paper towel and your application is complete.